SF001 SINK FORM
8 Foot self-adhering flexible sink form. Will conform to most undermount sinks.
Posted by Unknown on 2nd Dec 2013
Not quite flexible enough to get into the sink corners. I heated it with a hair dryer to make it more pliable.
Posted by Unknown on 2nd Apr 2013
my sink has small radius in the corners and this prodect was to stiff. had to fab my own forms. it seems to be a good idea will try again on another sink.
Posted by Unknown on 28th Mar 2013
Hard to get into tighter curves. Easy to fix by using a warm airgun. Also not great for sinks that aren't straight up and down.
Posted by Nate on 27th Feb 2013
I loved the concept and it worked pretty well but needs to be a tad more flexible to help bend in a tight radius and when trimming pieces from the bottom it can tend to crack. Worked great just took some work to get it to fit the corners tight
Posted by Unknown on 25th Nov 2012
I built a DIY concrete counter top and the sink forn worked wonderful! Thank you so much!
Posted by Unknown on 21st Aug 2012
This product works great as advertised. The only problem is bending it around a very tight curve like a small sink. I would use this again and made a great looking counter top!
Posted by Carla- PA on 12th Jun 2012
Products are good...easy to work with and prompt shipping. I purchased edge molds, sink form, faucet knockouts.
Posted by Craig on 9th May 2012
I purchased the Half bull nose and sink form, these products worked good.