HB001 HALF BULLNOSE PACKAGE
Includes eight - 8' pieces (64 lineal feet) and six - 8' back-wall pieces (48 lineal feet).
FOR INTERNATIONAL SHIPPING RATES, PLEASE CALL.
Showing reviews 1-10 of 28 | Next
Posted by Unknown on 1st Mar 2015
Great product and easy to use.
Posted by Tim on 17th Feb 2015
Material came as advertised, high quality, commercial grade. Easy to cut and install. If you have ever formed a countertop with wood, this is a game changer. A very good value, saved me a lot of time.
Posted by Unknown on 6th Feb 2015
The product makes an extremely nice finish on the face and I had no problem installing or cutting the mitered corners. The only draw back that we had was that there were a couple of pieces broken I suppose during shipping and were unusable. We had more footage than we needed by buying the package so we didn't run short.
Posted by Unknown on 19th Jan 2015
Very easy installation, and even better finished results.
Posted by Jon Tate on 7th Dec 2014
I did our small kitchen and two bathrooms downstairs and our large kitchen upstairs. If you watch the video they give you it is a breeze to do. The only thing I can add is. Vibrate the outside ten times more than you think you need to. All and all a very good product and I plan to use again. The counters look great.
Posted by Dan Burche on 1st Oct 2014
I decided to make a BBQ island to organize my grill, BGE and smoker. What started as a small island ended up being 12 feet long with a 6 foot return. After looking at every countertop option out there which would survive NE weather I settled on concrete. Although I am pretty handy little of the project was anything I had ever done. When I stumbled on this site I liked that I could make an edge profile easy so I settled on a half bullnose and ordered the kit. The only reason I did not give it 5 stars is because they need to come up with a way to connect an edge profile to a back edge where there will be an overhang on the edge and nothing to butt into. I ended up building end plugs and glued them onto the ends of the counter profiles. I used Quickcrete Countertop mix and ordered color from Color Direct. I spoke with the tech assistance of the mix and followed their directions. I also had 2 other persons helping mix and pour. For me, I am quite hey with the end result but can attest that you will not be able to over vibrate the edges so just do it until you are sick of it and you will still have some pin holes to fill. Take your time to make accurate corners and tape them with good duct tape. Lastly use a quality sealer but you will likely not find it at a box store. I also used the tech support from this site and they were outstanding. Best of luck- Dan
Posted by Nina on 10th Sep 2014
I paid for speedy shipping and they arrived all intact and as promised for the weekend project. They were easy to install, form corners and cut, even without the form holding tool. We are definitely concrete amateurs ( as in, never ever worked with it before) so the instruction videos were very helpful. We poured in place about 64 sq feet of concrete and it turned out great. The edges were the best part, leaving a nice shiny finish. As mentioned in some other previous review, the wall form was very narrow but I think it has to be in order for the back splash to cover it up. All in all, I would highly recommend!
Posted by Dean Rohr on 27th Aug 2014
As a first timer in pouring concrete counter tops, I was more then impressed with the product and instructions video.
Posted by Jeff B. on 15th Aug 2014
I've never done a concrete counter or much real concrete stuff. I watch your videos, watched a bunch of YouTube stuff and decided to take on the task (experiment) on an outdoor table.
I did a pour in place 48"x90", and used your 1/4 bullnose. LOVE how it turned out and how easy it was to work with your product.
I'm planning to do a BBQ workstation and looking to do that as a upside down form type to put in broken bottles and some wine related stuff (being a wino) and figure upside down will help keep the bottles where I want them, because on this table I found my bottles vibrated down lower than I wanted and I had to grind like crazy to get to them (lesson learned).
Do you have forms for upside down formed molds? I like the 1/4 round look.
Posted by Donna on 29th Jul 2014
LOVE THIS PRODUCT!
Showing reviews 1-10 of 28 | Next